Titan 3 filtering Area's
Filtering can be used to stop an area or areas reporting via any given Comms Path.
Note: If filtered out an area will not display any alarms/arms/tampers ETC.. on the chosen Comms Path at all
Select your Comm Path
Challenger Communications>Comms Paths>
Main (Tab) Select: Path no. to be filtered> SAVE
Create a new Area Group
Create a new Area Group excluding the area’s you don’t want to report.
Only area’s in filtered Area or Area Group will report and no others will
The functions assigned to the Area Group do not matter.
Add Area group to Filter
In Filter Event to Area select Area Group from drop-down and enter the relevant group number.
Note: Common open/close needs to be unticked otherwise only the lowest area of the area group will report
In the example below i have filtered area 1 to 9 from reporting on USB via Alarm Group 2
On arming/disarming all areas only areas 10 to 16 will report
You can remove filter by setting the Area Group in filters back to 0 and saving.