To get all Tecom supplied reader LED to work the same from default settings, the following options and wiring needs to be done:
Smart Card Reader on Bus direct:
- Online BLUE options set to Access + Door Open
Smart Card Reader on NAC Bus:
- Online BLUE options set to Access + Door Open
Smart Card Reader on TS0867:
- Online BLUE options set to Access + Door Open
Smart Door Controller (with Smart card reader connected on Wiegand) on panel BUS direct:
Hardware: LED 1 = Brown, LED 2 = Yellow
Options:
- LED 1 options to LED 1 Secure
- LED 2 options to Access + Door Open
Smart Door Controller on NAC BUS with Smart Card Reader connected on Wiegand:
Hardware: LED 1 = Brown, LED 2 = Yellow
Options:
- LED 1 options to LED 1 Secure
- LED 2 options to Access + Door Open
Smart Door Controller on TS0867 BUS with Smart Card Reader connected on Wiegand:
Hardware: LED 1 = Brown, LED 2 = Yellow
Options:
- LED 1 options to LED 1 Secure
- LED 2 options to Access + Door Open
TS0867 Door Controller Wiegand interface with Smart Card Reader:
Door LED options to Two LED Access / Secure.
Hardware: LED 1 = Yellow, LED 2 = Brown
Unfortunately the disarm LED does not flash for access.
Dual Wiegand Interface on NAC with Smart Card Reader on Wiegand:
Hardware: LED 1 = Yellow, LED 2 = Brown
Dual Wiegand Interface on Panel with Smart Card Reader on Wiegand:
Hardware: LED 1 = Yellow, LED 2 = Brown